【Fastest】Bminer 14.3.0 reduce the CPU usages for Grin / Aeternity by default and 14.2.0 improve performance of AE


#1

Bminer: When Crypto-mining Made Fast

Bminer is a highly optimized cryptocurrency miner that runs on modern NVIDIA GPUs (Maxwell and Pascal, i.e. GPUs that have compute capability 5.0 or above).

Bminer is one of the fastest publicly available miners today – we use various techniques including tiling and pipelining to realize the full potentials of the hardware.

Download
https://www.bminer.me/releases/

What’s new in Bminer 14.3.0(Current)

  • Improve the performance for Cuckatoo31.
  • Support 2080Ti for Cuckatoo31.
  • Reduce the CPU usages for Grin / Aeternity by default.
  • Reduce the likelihood of rejected shares for Cuckatoo31.

What’s new in Bminer 14.2.0

  • Experimental support for Cuckatoo31 on 1080Ti.
  • Fix the regression where ETH dual mine fails to start on Windows.
  • Improve performance on mining Aeternity.
  • Support tweaking the CPU usage for mining AE / Grin with the -intensity flag.

What’s new in Bminer 14.1.0

  • Improve performance of AE / Grin on Turing cards.
  • Improve performance of AE / Grin on lower-end CPUs and Windows platforms.
  • Support mining beam on leafpool and nicehash.
  • Fix the regression where /api/v1/devices is occasionally unresponsive.

What’s new in Bminer 14.0.0

  • Improved Grin/AE mining speed.
  • Print fidelity information. It is a measure of the luck/miner correctness. Overtime, the number should be close to one. For miners running over two hours, the fidelity should be at least greater than 0.95.
  • Improved multi-card performance on Windows.
  • Improved the miner fidelity by 8%-10%. You will not see big local difference but you will see roughly 10% higher speed on the pool side.
  • Reduced reject chance.
  • Fixed equihash issue.
  • Fix the regression that the equihash miner fails to start on Windows.

What’s new in Bminer 13.1.0

  • Support mining Grin / AE with 4G or 5G of video memory. (P104 only on Linux)

What’s new in Bminer 13.0.0

  • 30% performance improvement on Grin and AE.
  • Reduce the likelihood of rejected shares.

What’s new in Bminer 12.2.0

  • Optimize CPU usage.
  • Fix compatibility issues with grin-pool.org and grinmint.com.
  • Experimental support for Turing GPUs.
  • Allow bminer to run with older NVIDIA drivers.

What’s new in Bminer 12.1.0

  • 50% performance improvement on Aeternity.
  • 10% performance improvement on Grin.
  • Support 8GB cards on Windows 10.
  • Support SSL connections for Grin.

What’s new in Bminer 11.3.0

  • Improve the performance of Aeternity for 6GB cards
  • Support mining beam over beepool
  • Output solution/s instead of nounce/s when mining beam

What’s new in Bminer 11.2.0

  • Experimental support for Beam

What’s new in Bminer 11.1.0

  • Experimental support for Aeternity

AE mining on stock settings:

  • 11.80 Sol/s on RTX 2080ti
  • 8.9 Sol/s on RTX 2080
  • 7.40 Sol/s on GTX 1080Ti
  • 4.37 Sol/s on GTX 1070
  • 3.15 Sol/s on GTX 1060 6G
  • 6.60 Sol/s on P102
  • 4.10 Sol/s on P104

Grin(Cuckaroo29) mining on stock settings:

  • 10.8 G/s on GTX 2080Ti
  • 7.90 G/s on GTX 2080
  • 7.10 G/s on GTX 1080Ti
  • 4.60 G/s on GTX 1070
  • 3.20 G/s on GTX 1060 6G
  • 6.76 G/s on GTX P102
  • 4.00 G/s on GTX P104

Grin(Cuckaroo31) mining on stock settings:

  • 2.2 G/s on GTX 2080ti
  • 1.3 G/s on GTX 1080 Ti

Please see https://www.bminer.me/performances/ for more performance information.

Mining Aeternity (AE)

The following section describes a few sample usages of mining Aeternity (AE). There are a few things that need to be customized for your own usages:

  • Substitute ak_27we6r5KVGpErVGedqFByq2GAEYrUP39G51jnadMRrDux1YDay with your own AE address.
  • Substitute worker to your worker name.

Bminer currently provides supports for mining AE. For example:

bminer -uri aeternity://[email protected]f2pool.com:7898

How to tweaking the CPU usage for mining AE / Grin with the -intensity flag?

Both Aeternity / Grin requires significant CPU power to aid the mining. You might have sub-optimal performance if the machine is running on a low-end CPU (e.g. Intel Celeron) with multiple GPUs. Optionally, you can experiment the CPU usage with the -intensity flag:

bminer -uri cuckaroo29://bminergrin.worker:[email protected]:13654 -intensity 6

The intensity is between 0 and 12. Lower intensity has lower CPU usage but potentially slower on mining.


#2

can i mine on other pool ?


#3

Thank you for the English version!


#4

May I ask what pool you want to use?
You can use f2pool at this moment, we will support more pools in the future.


#5

Ok so to use your miner we need to mine on f2pool… One pool one miner… It’s kind of sad. I know it’s not your fault.


#6

We will support more pools in the future.


#7

What’s new in Bminer 11.3.0 (Current)

  • Improve the performance of Aeternity for 6GB cards
  • Support mining beam over beepool
  • Output solution/s instead of nounce/s when mining beam

#8

Significantly better on one GPU (1070) with 398.11 driver (Win7) - 2.98 H/s. Significantly worse on 6x1070 rig with 416.94 driver (Win7) - about 1.4 H/s per each GPU. Can it run as high as 6*2.98 H/s on 6xGPU rig?


#10

Significantly better on one GPU (1070) with 398.11 driver (Win7) - 2.98 H/s.

the hashrate on the pool side is around 0.061 Ksol/s, on stock settings.
It should run as high as 6*2.98 H/s on 6xGPU rig.
How many hours have you tested, would you please test longer?


#11

AE mining on stock settings.

  • local output is 2.98 H/s on P106, around 0.046 Ksol/s on F2pool.
  • local output is 4.30 H/s on 1070, around 0.061 Ksol/s on F2pool.
  • local output is 4.54 H/s on 1080ti. around 0.073 Ksol/s on f2pool.

#12

Only get ~2H with P106…somthing wrong with the configuration?


#13

The local output number looks low but if you check the poolside hashrate you will see a proper number.


#14

@realbminer

Could you please provide screenshots of the numbers with wattage from your miner for 1070? Could you please include your settings? The numbers you are listing doesn’t seem to add up to what I am getting.

This is what I get on my 6x1070s.


#15

@realbminer

And this is the output from f2pool for the 6x1070s.


#16

Hi, very much for your test and feedback.
on stock setting


#17

Hi, very much for your test and feedback.
on stock setting


#18

@realbminer could you please show the output of your miner mining like I did? Specifically for 1070.


#19


#20

just added, please see the output on poolside.


#21

I only get local 20 h/s and pool site 0.238 Ksol/s with 6* 1080ti on pl 70 gpu +100 and mem +500 on driver
398.11

Why is it so low? Hspminer gives me 0.340 Ksol/s

Seems to me something is wrong with Bminer