Frequently Asked Questions (FAQ): Token Migration Phases 1, 2, 3

Hi @ae-albena

Today i have transferred my AE ERC 20 Tokens from an exchange to Airgap vault ERC-20 address. Now the tokens are showing in the Airgap AE ERC20 wallet. Can you tell me how these coins will be migrated to mainnet.attached the Screenshot of Airgap vault for your reference.

well you yourself have the answer, you can not transfer tokens from 0x to Ak_ because they are in different blockchain… the instruction for the migration says that you send your tokens from 0x to another 0x that is signed with your address Ak_
I hope I explained myself well.

How did you do it? I can’t get my tokens to go to Airgap.

Yep, I used several methods just to verify that wasn’t the issue.

All of my AE erc-20 tokens are stored on a Ledger Nano S. I used my Ledger to send (attempt) to both Airgap wallet and Base aepp wallet, using MEW. I checked the dataloads all 3 times and everything looked good.

Airgap wallet:
ak_2SC5fzHWAhQPiQoEWzL8YfRFd56W8PaqSqYyarsUyKzm4sTm9D
Base Aepp:
ak_LURP2sFCc7cYW3cPZkTdg7VbEuX6fZWFawv4snt923fqjd4He

I tried 3 different times: .1AE, 3AE, 2AE

https://etherscan.io/tx/0x0f8e45eb3aba17282ea921a9280ab56c2087ceff45f2a05f3071132d53c3c2a3
https://etherscan.io/tx/0x8fd36f0fe46b9f7fe10fe00267770cffafe0ddb9668e4e800a6d78aac0613b87

https://etherscan.io/tx/0x12fe886b6e19343aed751ab1c64b116b9749df7377256a7519cb3a185fe8fb7c

@ae-albena I’m aware they are different blockchains. As far as I can tell, I didn’t send Ox to Ak_, I did as I was told to do by the instructions.
I VERY closely followed the instructions (watched all of the videos and everything).

Here is the data payload of another transaction that I used the exact same process for:

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

Everything checks out there but when I actually send the tokens to be migrated, they disappear.

I seem to be having the same issue that a number others are also experiencing. Followed the migration process using AirGap Vault and Metamask. Used the aepp-migrate.aeternity.com/#/migration tool to scan my AE wallet address ( ak_2dFFdMoDLa9sETxiUi7RpsaUDpQd6xZKrFE9YkqYrUZEo1cj1e )
I was certain my address and identicon are correct. The next page showed me the following but after confirming and approving the transaction in metamask, I was redirected to my migration check page showing 0 ae. I’ve done this from three different ethereum wallets with the same results.

  • Your Ethereum Account

0x5056521a7e2B1A7ccf896AFE138d5266c7121076

  • AE Token Contract

0x5CA9a71B1d01849C0a95490Cc00559717fCF0D1d

  • AE Migration Contract

0x8a3B7094e1D80C8366B4687cB85862311C931C52

  • Your AE Mainnet Address

ak_2dFFdMoDLa9sETxiUi7RpsaUDpQd6xZKrFE9YkqYrUZEo1cj1e

Below is the transaction for my first attempt 1 day and 2 hours ago on etherscan. If you look at the Input Data as UTF8, you can see my AE wallet address is included.

I have more AE ERC20 tokens I’d like to migrate but I am concerned it will not go well since I cannot get a status on the number pending.

The first transaction:
https://etherscan.io/tx/0xcd2068bf5469a8d5b9268de3367154d6f2feae509141e3d83ab1f57fe2cd4ece

Hey @siva, I just answered you here:

@eruizr82, tell us which one of the methods did you use exactly?

AirGap cannot automatically migrate your tokens, we use AirGap’s Mainnet æternity wallet. Check out the video below - if you already have your Mainnet AE address, then you need to transfer your ERC20 tokens to MetaMask or MyEtherWallet and migrate them:

Let me know how it goes:
Albena

Hey @roccof, your transaction is successful - you can check by pasting the payload here:

https://verify-data.aeternity.com/

Your tokens however will become available in your Mainnet address after the hard fork in September - then your balance will be updated :wink:

Best,
Albena

Hey @d_jalb - this first transaction seems ok - https://etherscan.io/tx/0x8fd36f0fe46b9f7fe10fe00267770cffafe0ddb9668e4e800a6d78aac0613b87

You can check by pasting the payload here:
https://verify-data.aeternity.com/

The tokens will become available in your Mainnet address after the hard fork in September.

Best,
Albena

@d_jalb, the other 2 transactions seem fine as well, except that the first one is for 0.1 AE and not 1 AE :slight_smile:

Your Mainnet balance will be updated after the hard fork in September :wink:

Best,
Albena

Hi,
I am trying to migrate my AE tokens using mew. However, once I click on ‘proceed with MEW’ a new tab opens up of vintage MEW. When I click on ‘MEW connect’ a QR code appears and I log into my MEW app on my phone and click ‘scan to connect’ it tries to connect but nothing happens and then my app says ‘try again’. I have done this several times and it will not connect and I do not know what to do?

1 Like

Hi,
I am trying to migrate my AE tokens using mew. However, once I click on ‘proceed with MEW’ a new tab opens up of vintage MEW. When I click on ‘MEW connect’ a QR code appears and I log into my MEW app on my phone and click ‘scan to connect’ it tries to connect but nothing happens and then my app says ‘try again’. I have done this several times and it will not connect and I do not know what to do?

Hey, do you have the possibility to use the other option, not relying on MEW ? They unfortunately changed a few things, and they don’t run as smoothly as they have used to. We’re trying to figure out how to support NEW again though.

1 Like

Hello,

I’m unable to migrate my AE tokens from MEW.

The error that is returned is:
Insufficient funds. The account you tried to send a transaction from does not have enough funds. Required 12300000000000000 and got: 0.

The vintage subdomain is loaded properly and no issues are shown when I check the payload data.
I bought the tokens with BTC if that is important.

Should I transfer some ETH to the wallet for processing this migration or I miss something else?

Thanks for the assistance!

Hi, thanks for responding. No, I do not have another way.

Hey, indeed, your ETH wallet needs some ETH to migrate the tokens. Something below 0.01 should be way more than enough, I will check again a little later this day again though and post again.

Hello! My data - 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
My address ak_etwiHqMP3GHwDH2fetzoUZvSchKeUWxjNdpFcpB3wFaUih1jx
everything is ok, but i can’t see my tokens on my AirGap application, please comfort me

Hello @kataky,

See here:

You’ve migrated 800 AE in Phase 3 - that means that your balance will be updated after the hardfork in September and you’ll see your tokens then :slight_smile:

It’s all fine :wink:

Best,
Albena

Hello Albena…

As September nears I am just getting an update on whether or not there will be any relief for those who lost their token in the initial phase? I have about 4000 AE riding on it, I really hope you guys will be able to figure something. Thanks again,

NUZZI

1 Like